Electronic Ignition Safety Device
HOW IGNITION SAFETY DEVICES WORK
The electronic Ignition Safety Device (eISD) contains an integral Exploding Foil Initiator (EFI) co-located in the same mechanical package, and therefore is close coupled (extremely low inductance and resistance) for extremely high reliability functioning. The eISD is part of a distributed Electronic Safe and Arm Device (ESAD) with one Central ESAD and multiple Remote eISDs. The remote eISDs are Arm/Fire devices that receive a high voltage low current input from the central ESAD and charge up the high voltage circuitry to a desired voltage, then when commanded, eisd discharges this energy into an EFI. We have an EFI design that includes an internal Thru Bulkhead Initiator (TBI) capable of withstanding rocket motor back-pressure after functioning.
The eISD includes High Side Static P-Channel Switch, Low Side Static N-Channel Switch and an N-Channel Dynamic switch to comply with MIL-STD-1901A. These inhibits are unique to meet the safety board requirements. The dynamic inhibit is controlled by the proper sequence of the other two inhibits. A communication bus is utilized to select the appropriate remote ISD to function. Each networked bus allows for up to 48 multiple point remote eISDs to be connected. Each eISD is independently Armed and Fired with very precise timing of events. The unique inhibits can be controlled from Acceleration, Break-wires, switches etc. Our designs can be completely interchangeable with most standard legacy ISD designs.
Interested in our Ignition Safety Device?
We would love to hear about your program and how we may help.